Tobee® TH Slurry Pumps - TOP10 Slurry Pump Manufacturer

Tobee^® TH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling highly abrasive,high density slurries.
Design Features:

• Horizontal,Cantilevered,Centrifugal,Single stage slurry pump design.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer
• Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Shaft seal - Packing seal,Centrifugal seal,Mechanical seal;
• Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.
• The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
• Easy to install and maintain in on-site application.

Tobee^® TH Slurry Pumps Quick Selection Chart:

Tobee^® TH Slurry Pumps Performance Parameters:

Model	Max.Power (kw)	Materials		Clear water performance					Impeller Vane No.
		Liner	Impeller	Capacity Q ( m3/h)	Head H ( m)	Speed n (rpm)	Eff.η (%)	NPSH (m)
TH1.5/1B	15	M	M	12.6~28.8	6~68	1200~3800	40	2~4	5
		RU	RU	10.8~25.2	7~52	1400~3400	35		3
THH1.5/1B	30	M	M	16.2~34.2	25~92	1400~2200	20	1~5.5	5
TH2/1.5B	15	M	M	32.4~72	6~58	1200~3200	45	3.5~8	5
		RU	RU	25.2~54	5.5~41	1000~2600	50	2.5~5
TH3/2C	30	M	M	39.6~86.4	12~64	1300~2700	55	4~6	5
		RU	RU	36~75.6	13~39	1300~2100		2~4
THH3/2D	60	M	M	68.4~126.8	25~87	850~11400	47	3~7.5	5
TH4/3C	30	M	M	86.4~198	9~52	1000~2200	71	4~6	5
		RU	RU	79.2~180	5~34.5	800~1800	59	3~5	5
TH4/3D	60	M	M	97.2~198	9~53	1000~2200	71	4~6	5
		RU	RU	79.2~180	5~34.5	800~1800	59	3~5	5
THH4/3E	120	M	M	126~252	12~97	600~1400	50	2~5	5
TH6/4D	60	M	M	162~360	12~56	800~1550	65	5~8	5
		RU	RU	144~324	12~45	800~1350	65	3~5	5
TH6/4E	120	M	M	162~360	12~56	800~1550	65	5~8	5
		RU	RU	144~324	12~45	800~1350	65	3~5	5
THH6/4S	560	M	M	324~720	30~118	600~1000	64	3~8	5
TH8/6E	120	M	M	360~828	10~61	500~1140	72	2~9	5
		RU	RU	324~720	7~49	400~1000	65	5~10	5
TH8/6R	300	M	M	360~828	10~61	500~1140	72	2~9	5
		RU	RU	324~720	7~49	400~1000	65	5~10	5
TH10/8ST	560	M	M	612~1368	11~61	400~850	71	4~10	5
		RU	RU	540~1188	12~50	400~750	75	4~12
TM10/8E	120	M	M	666~1440	14~60	600~1100	73	4~10	5
		RU	RU	540~1188	10~42	500~900	79	5~9	5
TH12/10ST	560	M	M	936~1980	7~68	300~800	82	6	5
		RU	RU	720~1620	7~45	300~650	80	2.5~7.5
TH14/12ST	560	M	M	1260~2772	13~63	300~600	77	3~10	5
		RU	RU	1152~2520	13~44	300~500	79	3~8	5
TH16/14ST	560	M	M	1368~3060	11~63	250~550	79	4~10	5
TH16/14TU	1200
TH18/16ST	560	M	M	2160~5040	8~66	200~500	80	4.5~9	5
TH18/16TU	1200
TH20/18TU	1200	M	M	2520~5400	13~57	200~400	85	5~10	5

Tobee^® TH Slurry Pumps Structural Design:

Metal Lined Pump			Rubber Lined Pump
No	Parts Name	Materials	No	Parts Name	Materials
1	Liner	27.5% UltraChrome Alloy	1	Frame Plate	QT500-7
2	Frame Plate	QT500-7	2	Expeller Ring	27% High Chrome Alloy
3	Frame Plate Liner Insert	27.5% UltraChrome Alloy	3	Gland Assembly	HT200
4	Cover Plate	QT500-7	4	Shaft Sleeve	420 Stainless Steel
5	Throat Bush	27.5% UltraChrome Alloy	5	Expeller	27% High Chrome Alloy
6	Impeller	27.5% UltraChrome Alloy	6	Frame Plate Liner	Rubber Coated High Tensile Steel
7	Expeller Ring	27% UltraChrome Alloy	7	Impeller	Rubber Coated High Tensile Steel
8	Shaft Sleeve	420 Stainless Steel	8	Cover Plate Liner	Rubber Coated High Tensile Steel
9	Expeller	27% HighChrome Alloy	9	Cover Plate	QT500-7
10	Bearing Assembly	SKF/Timken (Standard)

Tobee^® TH Slurry Pump Wetted Parts Design:

Tobee^® TH Slurry Pumps Shaft Seal Arrangement:

• Packing Seal is a general shaft seal.It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.

	No.	Part name	Materials
	1	Stuffing box	KmTBCr27
	2	Lantern restrictor	1Cr8Ni9Ti
	3	Packing	PTFE
	4	Gland assembly	HT250
	5	Shaft sleeve	KS81

• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.

	No.	Part name	Materials
	1	Expeller ring	KmTBCr27
	2	Expeller	KmTBCr27
	3	Packing	PTFE
	4	Neck ring	1Cr8Ni9Ti
	5	Lantern ring	1Cr8Ni9Ti
	6	Gland assembly	HT250
	7	Oil cup	Q235

• Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition,So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.

	No.	Part name	Materials
	1	Static ring assembly	SS316
	2	Rotating ring assembly	SS316

Tobee^® TH Slurry Pumps Drive Module Design:

Tobee^® TH Slurry Pumps Frame Explanation:

Frame type	A	B	C	D	E	R	F	G	S	T
Max.Power (kw)	7.5	15	30	60	120	300	260	600	560	1200
Frame Weight (kg)	17	24	45	77.5	154	228	555	1006	546	1156
Amount of Shaft Sealing Water (l/s)	0.15	0.25	0.35	0.55	0.70	0.70	0.70	1.20	1.20	1.60

Tobee^® TH Slurry Pumps On-site Applications:

• Mining	• Mineral processing	• Coal prep	• Cyclone feeds
• Tunnel	• Chemical slurries	• Tailings	• Mill grinding
• Ash handing	• Paper and Pulp	• Waste sludge	• Coarse sand
• Lime mud	• Phosphoric acid	• Dredging	• Construction
• Alumina Industry	• Power Plant	• Potash Fertilizer Plant	• Other industries

Typical:

Mining & Mineral Processing
The slow running speeds of the Tobee TH Heavy Duty Slurry Pump, together with the comprehensive choice of abrasion resistant alloys and elastomers, provide unrivalled performance and service life for all abrasive mining and minerals processing applications.

Chemical Process
The interchangeability of alloy and elastomer components in the same pump casing, together with a wide range of mechanical seals, make the Tobee TH Heavy Duty Slurry Pump the most flexible choice for the chemical plant environment.

Sand & Gravel
Designed for easy and simple strip down and re-assembly, the Tobee TH Heavy Duty Slurry Pump minimises downtime, making it the ideal choice where installed stand by pumps are not available.

Sugar Processing
The premium reliability and service life of the Tobee TH Heavy Duty Slurry Pump is specified by many sugar plant engineers worldwide where uninterrupted pump operation during the sugar campaign is a critical requirement.

Flue Gas Desulphurisation
The new generation of specially formulated abrasion and corrosion resistant alloys, together with the very latest elastomer technology, positions Tobee Pumps firmly as a major supplier of pumps to the FGD industry.

Oil & Gas Exploration
Over a number of years we have developed the proven design of the Tobee TH Heavy Duty Slurry Pump ranges to suit the specific demands of offshore applications. We can now offer the most reliable top side solution to erosive wear.

Industrial Applications
Wherever abrasive solids are causing premature failure of pumps, the Tobee TH Heavy Duty Slurry Pump range has the right combination of performance, wear life and reliability to bring the customer the lowest cost of ownership.

Tobee^® TH Slurry Pumps Dimensions:

* Tobee^® is a registered trademark and does not represent or is not in any way affiliated with Warman^® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.
* Tobee^® TH slurry pumps and spares are only interchangeable with Warman^® AH slurry pumps and spares.

* This document is the property of Tobee^® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.