150SV-SP and 100RV-SP Vetical Slurry Pump Parts
The rugged SP/SPR heavy duty sump pumps
are available in a wide range of popular sizes to suit most pumping
applications. These pumps are proving their reliability and efficiency
worldwide in:
• minerals processing;
• coal preparation;
• chemical processing;
• effluent handling;
• sand and gravel;
• and almost every other tank, pit or hole-in-the-ground slurry handling situation.
The SP/SPR pump design with either hard metal (SP) or elastomer covered (SPR) components makes it ideal for:
• abrasive and/or corrosive slurries
• large particle sizes
• high density slurries
• continuous or “snore” operation
• heavy duties demanding cantilever shafts
The SP/SPR heavy duty sump pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe.
To suit special requirements other slurry pump wet ends can be fitted to the standard SP vertical slurry pump dry end.
• minerals processing;
• coal preparation;
• chemical processing;
• effluent handling;
• sand and gravel;
• and almost every other tank, pit or hole-in-the-ground slurry handling situation.
The SP/SPR pump design with either hard metal (SP) or elastomer covered (SPR) components makes it ideal for:
• abrasive and/or corrosive slurries
• large particle sizes
• high density slurries
• continuous or “snore” operation
• heavy duties demanding cantilever shafts
The SP/SPR heavy duty sump pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe.
To suit special requirements other slurry pump wet ends can be fitted to the standard SP vertical slurry pump dry end.
HEBEI TOBEE PUMP CO.,LIMITED
Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
Email:Sales@tobeepump.com | Skype:Tobee.pump | Mob:+86-18032034573 | Web:www.tobeepump.com
评论
发表评论