Tobee Warman Rubber Slurry Pump is Designed for Abrasive Duties
he Tobee AHR rubber lined slurry
pump is 100% interchangeable with other standard rubber-lined slurry pumps. It
is the result of nearly a century of proven experience in the design,
manufacture and field operation of slurry pumps. The AHR rubber lined slurry pump
is built to stand up to the toughest services, while providing maximum
reliability and extreme ease of maintenance. Available in a wide variety of
natural and synthetic rubbers, the AHR, with its heavy duty design, extra thick
rubber liners and multiple rubber impeller options, provides you with the right
slurry pump for your application along with years of dependable service even
under the most severe operating conditions.
The Tobee AHR rubber slurry pump utilizes a soft natural rubber blend that offers the best combination of resilience and tear resistance for maximum wear life in abrasive and corrosive slurries. Tobee offers a wide variety of natural and synthetic rubbers as well as polymers in a range of hardness to suit almost any slurry application
Tobee Rubber Lined Slurry Pump Parts List
Rubber Selections and Application Guide for AHR Rubber Slurry Pumps
Please use the following chart as a general guide only. Refer to factory for specific rubber recommendations.
E = Excellent G = Good P = Poor
(1) Poor for oxidizing chemicals and strong acids
(2) Fine particles only (150 mesh or less)
Applications
√ Primary Metals:
SAG/ball mill discharge, cyclone feed and tailings
√ Mineral Processing:
Slurry transfer, float cells and thickener underflow
√ Non-Metallic Mining:
Clay slurries, phosphate, soda ash and potash
√ Sand and Gravel:
Sand and aggregate slurries, tailings
√ Power Utility:
Absorber recycle, gas cooling, filter feed, flue gas desulfurization and gypsum tailings
√ Chemical:
Acid transfer, leach feed
√ Pulp and Paper:
Lime slurries and fly ash
√ General Industry:
Foundry sand, plant waste and ash slurries
The Tobee AHR rubber slurry pump utilizes a soft natural rubber blend that offers the best combination of resilience and tear resistance for maximum wear life in abrasive and corrosive slurries. Tobee offers a wide variety of natural and synthetic rubbers as well as polymers in a range of hardness to suit almost any slurry application
Tobee Rubber Lined Slurry Pump Parts List
Rubber Selections and Application Guide for AHR Rubber Slurry Pumps
Please use the following chart as a general guide only. Refer to factory for specific rubber recommendations.
E = Excellent G = Good P = Poor
|
Rubber Type
|
Hardness
|
Temperature
|
PH Value
|
Resistance to
|
||||
|
Durometer
Share A
|
Maximum
|
Min.
|
Max.
|
Abrasion
|
Moderate
Chemicals
|
Hydrocarbons
&
Oils
|
||
|
Natural Rubber
|
40
|
154°F
|
68°C
|
4.5
|
12
|
E
|
G(1)
|
P
|
|
Natural Rubber (Soft)
|
36
|
150°F
|
66°C
|
4.5
|
12
|
E
|
G(1)
|
P
|
|
Natural Rubber (Hard)
|
50
|
180°F
|
82°C
|
4.5
|
12
|
E
|
G(1)
|
P
|
|
Neoprene
|
60
|
212°F
|
100°C
|
3.0
|
12
|
G
|
G(1)
|
G
|
|
Nitrile (60)
|
60
|
220°F
|
105°C
|
3.5
|
12
|
G
|
G(1)
|
E
|
|
Chlorobutyl
|
50
|
250°F
|
121°C
|
1.0
|
12
|
G
|
E
|
P
|
|
Hypalon
|
55
|
230°F
|
110°C
|
<1.0
|
14
|
G
|
E
|
G
|
(1) Poor for oxidizing chemicals and strong acids
(2) Fine particles only (150 mesh or less)
Applications
√ Primary Metals:
SAG/ball mill discharge, cyclone feed and tailings
√ Mineral Processing:
Slurry transfer, float cells and thickener underflow
√ Non-Metallic Mining:
Clay slurries, phosphate, soda ash and potash
√ Sand and Gravel:
Sand and aggregate slurries, tailings
√ Power Utility:
Absorber recycle, gas cooling, filter feed, flue gas desulfurization and gypsum tailings
√ Chemical:
Acid transfer, leach feed
√ Pulp and Paper:
Lime slurries and fly ash
√ General Industry:
Foundry sand, plant waste and ash slurries
HEBEI TOBEE PUMP CO.,LIMITED
Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
Email:Sales@tobeepump.com | Skype:Tobee.pump | Mob:+86-18032034573 | Web:www.tobeepump.com
评论
发表评论