Tobee® TL Light Duty Slurry Pumps

Tobee^® TL Light Duty Slurry Pumps are higher efficient centrifugal slurry pumps, Designed for handling light abrasive and low concentration slurries.It is widely used in mining, minerals processing, paper-making, coal washing, power plant, metallurgy, petrochemical, building material, dredging, and other industrial fields etc. TL slurry pumps operate in high speed with small volumes to save floor area, the metal lined and rubber lined are interchangeable, Impeller adopts hyper chrome alloys or rubber etc.

SPECIFICATIONS:

Size: 20-650mm
Capacity: 2.34-9108m3/h
Head: 4-60m
Pressure: Max.250psi
Materials: Hyper chrome alloy, Rubber, Polyurethane etc.

Design features:

• Light duty, high efficiency, high speed, horizontal centrifugal slurry pump design.
• Cylindrical structure of bearing assembly
• Ductile iron fully lined casing provides durability, strength and long service life.
• Large diameter, slow turning, high efficiency impellers (up to 90%+) result in maximum wear life and lower operating costs
• Hyper chrome alloy and rubber are interchangeable.
• Shaft seal can be packing seal, expeller seal or mechanical seal
• The discharge direction can be oriented to any eight positions at the interval of 45 degrees

Tobee^® TL Light Duty Slurry Pumps Quick Selection Chart:

Tobee^® TL Light Duty Slurry Pumps Performance Parameters:

Model	Allowable Max. Power (kw)	Clear Water Performance
		Capacity  Q		Head H (m)	Speed n (r/min)	Eff. η （%）	NPSH (m)	Impeller Dia. (mm)
		m3/h	l/s
TL20A	7.5	2.34-10.8	0.65-3	6-37	1400-3000	40	2.5-3	152.4
TL50B	15	11.5-76	3.2-21.1	8.5-46	1400-2800	62	2.5-5.5	190
TL75C	30	18-151	5-42	4-46.4	900-2400	57	3-6	229
TL100D	60	46.8-324	13-90	7-48.3	800-1800	64	2-6	305
TL150E	120	115-568.8	32-158	10.5-51.8	800-1500	60	2.5-6	381
TL200E	120	234-910	65-235	9.5-40	600-1100	64	3-6	457
TL250E	120	396-1425	110-396	8–30	500-800	77	2-10	550
TL300S	560	468-2538	130-708	8-60	400-950	79	2-10	653
TL350S	560	650-2800	180-780	10-59	400-840	81	3-10	736
TL400ST	560	756-3312	210-920	7-37.5	300-600	85	2-8	825
TL450ST	560	1080-4356	300-1210	9-40	300-550	87	3-10	933
TL550TU	1200	1980-7920	560-2200	10-50	250-475	86	4-10	1213
TL650TU	1200	2520-9108	700-2530	10-55	200-350	86	2-8	1425
TLR50B	15	9-61	2.5-17	3-32.4	1200-2600	48	2.75-4.5	190
TLR75C	30	28.8-154.8	8-43	9-43	1100-2300	60	3-5	229
TLR100D	60	54-288	15-80	12-38	800-1600	65	2.5-5.5	305
TLR150E	120	72-576	20-160	4-38	800-1300	65	2.5-5.5	381
TLR250E	120	396-1425	110-396	8-30	500-800	77	2-10	550
TLR300S	560	432-1900	120-528	7-41	400-800	81	3-8	653
TLR350S	560	720-2844	200-790	10-41	400-700	86	3-7	736
TLR400ST	560	720-3312	200-920	7-51	300-700	80	2-10	825
TLR450ST	560	1008-4356	280-1210	9-48	300-600	80	2-9	933
TLR550TU	1200	1980-7920	560-2200	10-50	250-475	86	4-10	1213
TLR650TU	1200	2520-9108	700-2530	10-39	200-350	86	2-8	1425
Remark: 1. Capacity range recommended: 50%Q’≤Q≤110%Q’(Q’ Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed.

Tobee^® TL Light Duty Slurry Pump Structural Drawing:

Tobee^® TL Light Duty Slurry Pump Component Design:

Tobee^® TL Light Duty Slurry Pump Shaft Seal Arrangement:

• Packing Seal is a general shaft seal.It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.

	No.	Part name	Materials
	1	Stuffing box	KmTBCr27
	2	Lantern restrictor	1Cr8Ni9Ti
	3	Packing	PTFE
	4	Gland assembly	HT250
	5	Shaft sleeve	KS81

• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.

	No.	Part name	Materials
	1	Expeller ring	KmTBCr27
	2	Expeller	KmTBCr27
	3	Packing	PTFE
	4	Neck ring	1Cr8Ni9Ti
	5	Lantern ring	1Cr8Ni9Ti
	6	Gland assembly	HT250
	7	Oil cup	Q235

• Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition,So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.

	No.	Part name	Materials
	1	Static ring assembly	SS316
	2	Rotating ring assembly	SS316

Tobee^® TL Light Duty Slurry Pump Drive Module Design:

Tobee^® TL Light Duty Slurry Pump Frame Explanation:

Frame type	A	B	C	D	E	R	F	G	S	T
Max.Power (kw)	7.5	15	30	60	120	300	260	600	560	1200
Frame Weight (kg)	17	24	45	77.5	154	228	555	1006	546	1156
Amount of Shaft Sealing Water (l/s)	0.15	0.25	0.35	0.55	0.70	0.70	0.70	1.20	1.20	1.60

Tobee^® TL Light Duty Slurry Pumps On-site Applications:

• Mining	• Mineral processing	• Coal prep	• Cyclone feeds
• Tunnel	• Chemical slurries	• Tailings	• Mill grinding
• Ash handing	• Paper and Pulp	• Waste sludge	• Coarse sand
• Lime mud	• Phosphoric acid	• Dredging	• Construction
• Alumina Industry	• Power Plant	• Potash Fertilizer Plant	• Other industries

Tobee^® TL Light Duty Slurry Pumps Dimensions:

* Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.
* Tobee® TL slurry pumps and spares are only interchangeable with Warman® L slurry pumps and spares.
* This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

HEBEI TOBEE PUMP CO.,LIMITED
Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
Email:Sales@tobeepump.com | Skype:Tobee.pump | Mob:+86-18032034573 | Web:www.tobeepump.com