Tobee® TSG Inilne Sea Water Pump
Tobee® TSG Inilne Sea Water Pump
is vertcial single-stage end-suction(axial suction) cantilever type
centrifugal pump, which is used to transport sea water or corrosive
liquid with viscosity similar to sea water and without solid particles.
The marked and rated performances and dimensions follow ISO 2858
international standard.It is widely used for marine booster, ballasting,
sanitation, sea water supply and drainage, cleaning boat and cleaning
fish etc.
Design Features:
• Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which coincides with the center of the pump feet strengthens the stability of running and the duration.
• Easy to mount. Because of the same apertures of both inlet and outlet which also locate on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. The motor is covered with a rainproof cap so that operation can be done outdoors. Mounting feet are equipped with the pump so that it can be stably mounted.
• Stable running, low noise, high concentricity of components. Bearings of low noise are used for the motor, the impellers are of best dynamic and static balance, no vibration at running and the environment thus being improved.
• No leakage. The shaft is mechaically sealed with carbide alloy wearable material, settling the serious leakage of the filling seal of a centrifugal pump, extending the duration and ensuring the operation place clean and tidy.
• Easy to maintain. Not necessary to remove the pipeline for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components.
• According to the operation condition, The pump can be installed by vertical, horizontal and multiways, according to the requirements for the flowrate and head, The pump also can be mounted in parallel or in series.
• Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which coincides with the center of the pump feet strengthens the stability of running and the duration.
• Easy to mount. Because of the same apertures of both inlet and outlet which also locate on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. The motor is covered with a rainproof cap so that operation can be done outdoors. Mounting feet are equipped with the pump so that it can be stably mounted.
• Stable running, low noise, high concentricity of components. Bearings of low noise are used for the motor, the impellers are of best dynamic and static balance, no vibration at running and the environment thus being improved.
• No leakage. The shaft is mechaically sealed with carbide alloy wearable material, settling the serious leakage of the filling seal of a centrifugal pump, extending the duration and ensuring the operation place clean and tidy.
• Easy to maintain. Not necessary to remove the pipeline for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components.
• According to the operation condition, The pump can be installed by vertical, horizontal and multiways, according to the requirements for the flowrate and head, The pump also can be mounted in parallel or in series.
Tobee® TSG Inilne Sea Water Pump Quick Selection Chart:
Tobee® TSG Inilne Sea Water Pump Performance Parameters:
Model | Size (mm) | Capacity Q | Head H (m) | Eff. η (%) | Speed n (r/min) | Power P (kw) | NPSHr (mm) | |
m3/h | l/s | |||||||
TSG15-80 | 15 | 1.1 | 0.3 | 8.5 | 26 | 2900 | 0.18 | 2.3 |
1.5 | 0.42 | 8 | 34 | |||||
2.0 | 0.55 | 7 | 34 | |||||
TSG20-110 | 20 | 1.8 | 0.5 | 16 | 25 | 2900 | 0.37 | 2.3 |
2.5 | 0.69 | 15 | 34 | |||||
3.3 | 0.91 | 13.5 | 35 | |||||
TSG20-160 | 20 | 1.8 | 0.5 | 33 | 19 | 2900 | 0.75 | 2.3 |
2.5 | 0.69 | 32 | 25 | |||||
3.3 | 0.91 | 30 | 23 | |||||
TSG25-110 | 25 | 2.8 | 0.78 | 16 | 34 | 2900 | 0.55 | 2.3 |
4 | 1.11 | 15 | 42 | |||||
5.2 | 1.44 | 13.5 | 41 | |||||
TSG25-125 | 25 | 2.8 | 0.78 | 20.6 | 28 | 2900 | 0.75 | 2.3 |
4 | 1.11 | 20 | 36 | |||||
5.2 | 1.44 | 18 | 35 | |||||
TSG25-160A | 25 | 2.6 | 0.12 | 29 | 31 | 2900 | 1.1 | 2.3 |
3.7 | 1.03 | 28 | ||||||
4.9 | 1.36 | 26 | ||||||
TSG32-100(I) | 32 | 4.4 | 1.22 | 13.2 | 48 | 2900 | 0.75 | 2 |
6.3 | 1.75 | 12.5 | 54 | |||||
8.3 | 2.32 | 11.3 | 53 | |||||
TSG32-125 | 32 | 3.5 | 0.97 | 22 | 40 | 2900 | 0.75 | 2.3 |
5 | 0.39 | 20 | 44 | |||||
6.5 | 1.8 | 18 | 42 | |||||
TSG32-125A | 32 | 3.1 | 0.86 | 17.6 | 43 | 2900 | 0.55 | 2.3 |
4.5 | 1.25 | 16 | ||||||
5.8 | 1.61 | 14.4 | ||||||
TSG32-160(I) | 32 | 4.4 | 1.22 | 33.2 | 34 | 2900 | 2.2 | 2 |
6.3 | 1.75 | 32 | 40 | |||||
8.3 | 2.32 | 30.2 | 42 | |||||
TSG32-200(I) | 32 | 4.4 | 1.22 | 50.5 | 26 | 2900 | 4 | 2 |
6.3 | 1.75 | 50 | 33 | |||||
8.3 | 2.32 | 48 | 35 | |||||
TSG32-200A | 32 | 2.8 | 0.78 | 44.6 | 34 | 2900 | 2.2 | 2 |
4 | 1.11 | 44 | 40 | |||||
5.2 | 1.44 | 42.7 | 42 | |||||
TSG40-100 | 40 | 4.4 | 1.22 | 13.2 | 48 | 2900 | 0.55 | 2.3 |
6.3 | 1.75 | 12.5 | 54 | |||||
8.3 | 2.31 | 11.3 | 53 | |||||
TSG40-160A | 40 | 4.1 | 1.14 | 29 | 34 | 2900 | 1.5 | 2.3 |
5.9 | 1.64 | 28 | 39 | |||||
7.8 | 2.17 | 26.3 | 39 | |||||
TSG40-160B | 40 | 3.8 | 1.06 | 25.5 | 34 | 2900 | 1.1 | 2.3 |
5.5 | 1.53 | 24 | 38 | |||||
7.2 | 2.0 | 22.5 | 37 | |||||
TSG40-200 | 40 | 4.4 | 1.22 | 51 | 26 | 2900 | 4 | 2.3 |
6.3 | 1.75 | 50 | 33 | |||||
8.3 | 2.31 | 48 | 32 | |||||
TSG40-200A | 40 | 4.1 | 1.14 | 45 | 26 | 2900 | 3 | 2.3 |
5.9 | 1.64 | 44 | 31 | |||||
7.8 | 2.17 | 42 | 30 | |||||
TSG40-200B | 40 | 3.7 | 1.03 | 38 | 29 | 2900 | 2.2 | 2.3 |
5.3 | 1.47 | 36 | ||||||
7.0 | 1.94 | 34.5 | ||||||
TSG40-250 | 40 | 4.4 | 1.22 | 82 | 24 | 2900 | 7.5 | 2.3 |
6.3 | 1.75 | 80 | 28 | |||||
8.3 | 2.31 | 74 | 28 | |||||
TSG40-100(I)A | 40 | 8 | 2.22 | 10.6 | 60 | 2900 | 0.75 | 2.3 |
11 | 3.05 | 10 | ||||||
14.5 | 4.03 | 9 | ||||||
TSG40-125(I) | 40 | 8.8 | 2.44 | 21.2 | 49 | 2900 | 1.5 | 2.3 |
12.5 | 3.47 | 20 | 58 | |||||
16.3 | 4.53 | 17.8 | 57 | |||||
TSG40-125(I)A | 40 | 8 | 2.22 | 17 | 57 | 2900 | 1.1 | 2.3 |
11 | 3.05 | 16 | ||||||
14.5 | 4.03 | 14 | ||||||
TSG40-160(I) | 40 | 8.8 | 2.44 | 33 | 45 | 2900 | 3 | 2.3 |
12.5 | 3.47 | 32 | 52 | |||||
16.3 | 4.53 | 30 | 51 | |||||
TSG40-160(I)A | 40 | 8.2 | 2.28 | 29 | 44 | 2900 | 2.2 | 2.3 |
11.7 | 3.25 | 28 | 51 | |||||
15.2 | 4.22 | 26 | 50 |
Tobee® TSG Inilne Sea Water Pump Structural Drawing:
Tobee® TSG Inilne Sea Water Pump Structural Design:
Tobee® TSG Inilne Sea Water Pump On-site Applications:
• Sea water | • Salt water | • Brine water | • Marine ballasting |
• Water circulation | • Marine fire fighting | • Sea water booster | • Cooling water |
• Mariculture | • Sanitation | • Seawater lift system | • Raw water |
• Mining water supply | • Garden water supply | • Agricultural irrigation | • Aquaculture |
• Reverse osmosis water | • HAVC system | • Chemicals | • Other industries |
Tobee® TSG Inilne Sea Water Pump Dimensional Drawing:
* For detailed dimensional drawings, Pls get in touch with TOBEE PUMP by email directly!
评论
发表评论