Tobee® WN500 Sand Dredge Pump integrated with the gearbox
Tobee® WN500 Sand Dredge Pump
is designed for continuously handling the most difficult higher
abrasive slurries & sands which contain too big solids, It has
advantages of single case, wide channel, high chrome wetted parts. The
discharge can be installed in 360 degree in any direction, easy to
install and use, good cavitation performance, anti-abrasion etc. WN500
dredge pump mainly used for dredging, explosive sludge, dredger, sewage,
mineral processing and metal smelting slag etc.
SPECIFICATIONS:
Inlet: 650mm
Outlet: 500mm
Capacity: 4500-5500m3/h
Head: 40-65m
Speed: 350-450r/min
Eff.: 78-80%
NPSHr: <4.8
Max. Particles: 250mm
Seal arrangement: mechanical seal
Materials: Hyper chrome alloy
Inlet: 650mm
Outlet: 500mm
Capacity: 4500-5500m3/h
Head: 40-65m
Speed: 350-450r/min
Eff.: 78-80%
NPSHr: <4.8
Max. Particles: 250mm
Seal arrangement: mechanical seal
Materials: Hyper chrome alloy
Design Features:
• Structure suitable for dredging ship:
The structure of WN500 pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
• Easy to Disassembly and Installation, Convenient Maintenance:
WN500 pump adopts front-disassembly structure in favor of easy disassembly and maintenance. Also it is equipped with special disassembly tools for each different part according to each part’s features.
The standard trapezoidal quadruple thread is adopted to connect the impeller and shaft, which not only transmits strong torque but also is easy to disassembly.
• Good Performance on NPSH:
The good NPSH performance of WN500 pump ensures the strong suction ability as well as deeper dredging depth and denser dredging concentration.
• Good Wear-resistant Performance, Long Service Time of Wet Parts:
Wet parts of this kind of dredging pump-impeller, liner and front & back liner plate are adapted anti-wear cast iron alloy whose hardness is more than 58HRC, who has both strong anti-attack feature and higher resistance wear and resistance abrasion features. The hardness of T05 material that is researched and tested successfully by Kingda can research 65HRC.
• Reliable Shaft Sealing Without Leakage
• Structure suitable for dredging ship:
The structure of WN500 pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
• Easy to Disassembly and Installation, Convenient Maintenance:
WN500 pump adopts front-disassembly structure in favor of easy disassembly and maintenance. Also it is equipped with special disassembly tools for each different part according to each part’s features.
The standard trapezoidal quadruple thread is adopted to connect the impeller and shaft, which not only transmits strong torque but also is easy to disassembly.
• Good Performance on NPSH:
The good NPSH performance of WN500 pump ensures the strong suction ability as well as deeper dredging depth and denser dredging concentration.
• Good Wear-resistant Performance, Long Service Time of Wet Parts:
Wet parts of this kind of dredging pump-impeller, liner and front & back liner plate are adapted anti-wear cast iron alloy whose hardness is more than 58HRC, who has both strong anti-attack feature and higher resistance wear and resistance abrasion features. The hardness of T05 material that is researched and tested successfully by Kingda can research 65HRC.
• Reliable Shaft Sealing Without Leakage
Tobee® WN500 Sand Dredge Pump Performance Parameters:
| Model | Capacity Q (m3/h) | Head H (m) | Speed n (rpm) | Eff. η (%) | NPSH (m) | Inlet Dia. (mm) | Outlet Dia. (mm) | Max. Particles (mm) |
| WN500 | 4500-5500 | 40-65 | 350-450 | 78-80 | <4.8 | 650 | 500 | 250 |
Tobee® WN500 Sand Dredge Pump On-site Applications:
| • Dredging | • Mining | • Sand Excavation | • Offshore dredging |
| • Reclamation works | • Sand reclamation | • Filling sands | • Dredger |
| • Damming | • Ash handing | • Waste sludge | • Coarse sand |
| • Blast slag | • Lime mud | • Coal prep | • Construction |
| • Sea reclamation | • Power Plant | • Potash Fertilizer Plant | • Other industries |
Tobee® WN500 Sand Dredge Pump Dimensional Drawing:
评论
发表评论